DAT Series :: ATE Electronics s.r.l.

DAT Series

Anti moisture devices

 

CARATTERISTICHE
Questi dispositivi vengono montati negli armadi dove si vuole
impedire la formazione di condensa.
Grazie all’uso di un termostato fissato sul dissipatore erogano la piena
potenza solo a temperature inferiori a 0°C, poi la riducono gradualmente
fino a staccarsi a 55°C.
La temperatura superficiale limitata a 70°C permette un montaggio rapido
senza aggiunta di protezioni, né per i componenti accostati, né per gli
interventi di manutenzione.
Il dispositivo da 100 W sfrutta l’ampia superficie del dissipatore mentre il
modello da 150W, pur mantenendo le dimensioni del 100W, richiede un
ventilatore che contribuisca all’uniformità della temperatura nell’armadio.
L’impiego come elementi scaldanti di resistori standard a norme MIL ne
incrementa l’affidabilità e la facilità di alimentazione.
Un semplice attacco a barra DIN ed una semplice morsettiera a vista
facilitano le operazioni di installazione.

Featuresdat1-01

 

One of the main causes for electrical troubles on electrical and electronic sets is due to the moisture which is formed on components during variation of the ambient temperature.

A simple and economic way to avoid these problems, consists on application of anti-condensation devices (Heaters) which maintain the temperature inside the enclosure some degrees higher than the ambient temperature in order to prevent moisture condensation.

The Heaters DAT100 and DAT150 have been developed for this specific use.

Their main features are :

- Surface temperature limited to 70°C allows assembling without problems.

- A thermoswitch permits maximum power at very low temperatures, then reduces the power dissipated till turn off the devices at +55°C.

- The DAT models are provided with simple clip mounting for 35mm DIN rail.

- Use of power wirewound resistors, under MIL-PRF-18546 G specs., increase reliability and suitable supply voltage.

 

Technical Specifications graficodat1-01

- Max power ratings 

DAT100 = 100W

DAT150 = 150W

- Supply voltage 

Standard 220 Vac ± 20% On request any supply voltage from 24 Vac to 220 Vac

- Dielectric strength

2000 Vac for any type

- Insulation resistance

1000 MOhm minimum at 500 Vdc

graficodat2-01

 

 

P = A x ΔT x K

A = Console internal surface (m²)

ΔT = Temperature difference (°C)

K = 3.5W/m² °C for plastic console

K = 5.5W/m² °C for iron plate (closed room)

disegnodat-01